One garage door panel costs $350 to $900 installed in 2026, and most homeowners pay $550. A steel panel costs $250 to $1,000. A wood panel costs $600 to $1,500. Use the garage door panel replacement cost calculator below. Pick your material, panel count and zip code. You get a total, a range and a parts-and-labour split in 30 seconds.
Garage Door Hub connects you with a trusted local pro. Need a repair? Need a replacement? Start here. First, find out what it should cost.
Garage Door Panel Replacement Cost Calculator
Estimate your project costs based on location, size, and specific requirements
Project Details
Your Cost Estimate
Based on current market rates (2026)
Estimated Total Cost
Prices include labor and materials
Important Information
What’s Included
- Local material/equipment delivery
- Service provider transportation
- Worksite preparation and protection
- Labor setup and mobilization time
- Panel replacement and installation
What’s Not Included
- Removing or modifying existing framing
- Repairing surface finishes and molding
- HVAC, electrical, or plumbing work
- Hazardous materials testing/remediation
- Permit or inspection fees
- General contractor markup (13-22%)
- Sales tax on materials
Cost-Saving Tips
- Schedule during off-peak seasons
- Replace multiple panels at once
- Choose standard materials/finishes
- Get multiple quotes from professionals
- Consider partial vs full replacement
- Maintain your door to prevent damage
Disclaimer: This calculator provides estimates only. Actual costs will vary due to unique project conditions, requirements, labor options, and material choices. Work not mentioned on this page, work with schedule difficulty, work during periods of local labor shortages, and work using premium materials may result in higher costs. We strongly recommend contacting reputable professionals for itemized assessments before making any decisions or commitments.
How much does a garage door panel cost in 2026?
Most panels land between $350 and $900 installed — one standard steel section, fitted by a pro. A custom wood panel, or a door whose profile is no longer made, costs more.
Angi puts the national average at $550 — see the Angi panel replacement cost guide, 13 Oct 2026. HomeGuide puts the range at $300 to $900 per panel (Oct 2026). HomeAdvisor puts it wider, at $250 to $1,000 (June 2026).
Watch: What Garage Door Repairs Cost in 2026 (Springs, Openers, Panels, New Doors) — American Garage Door, 5 Nov 2026. YouTube labels this video as content made with AI. Its panels section starts at 1:03.
| Panel | Typical cost in 2026, installed | What it usually covers |
|---|---|---|
| Single panel, basic steel (sectional) | $350–$900 | Panel, labour, hinge and roller transfer |
| Single panel, insulated steel | $450–$900 | Insulated panel, labour, seals |
| Single panel, aluminium or fibreglass | $400–$900 | Panel, labour, seals |
| Single panel, wood or custom carriage | $600–$1,500+ | Custom panel, labour, stain or paint |
| Two panels, steel | $600–$1,500 | 2 panels, labour, hardware |
| Three or more panels, steel | $900–$2,000+ | Often close to a new door — see below |
Sources: Angi, 13 Oct 2026; HomeGuide, Oct 2026; GarageDoorRepairDesk, 6 July 2026; 4Feldco, 7 Oct 2026. Prices include the panel and labour. Your area moves the total by 10% to 40%.
What your bill is made of
A panel bill has 3 parts. Most quotes show only 1 number.
The panel. The panel itself costs $150 to $800 (Angi, 13 Oct 2026). Steel is cheapest, wood dearest, and an insulated panel costs more than a single-layer one in the same size.
Labour. Labour runs $200 to $500 (Angi, 13 Oct 2026), or $150 to $500 on a second source — see the GarageDoorRepairDesk panel cost guide, 6 July 2026. A one-panel swap takes 1 to 3 hours on site. The rate is $60 to $100 per hour.
Extras. Springs, cables, rollers, tracks, sensors and paint add $150 to $550 when they need work at the same time (Angi, 13 Oct 2026). A $50 to $75 service call fee may sit on top, and it is often credited toward the repair.
Garage door panel cost by material
Material moves the price most, then size, then style.
Steel is the baseline. A steel panel costs $250 to $1,000 installed, and the panel alone costs $100 to $350. It is strong and light, but it dents — the most common panel job.
Insulated steel costs more than basic steel. The panel alone costs $150 to $450. It is heavier and quieter, and harder to match if the insulation type has changed.
Aluminium never rusts but dents easily. A panel costs $400 to $900 installed, and the panel alone costs $200 to $600.
Fibreglass never rusts and suits damp air. A panel costs $400 to $900 installed. A cracked fibreglass panel cannot be beaten back into shape.
Wood is the dearest material. A panel costs $600 to $1,500 or more installed, and the panel alone costs $300 to $1,000 or more. Most wood panels are made to order, so allow 2 to 4 weeks. Stain or paint adds $150 to $300.
Tip: pick the panel for your climate first, then for looks. If the door is insulated, price it with the garage door R-value calculator before you choose. If the door is heavy, check its weight with the garage door weight calculator — an 8×7 steel door weighs 83 lbs.
Garage door panel cost by size and panel count
A single door is 8×7 or 9×7 feet, a double door 16×7 feet — and the wider double panel costs more.
A single-door panel costs $250 to $550 installed for basic steel. A double-door panel costs $450 to $1,000 — twice as wide, and twice as hard to handle.
Two panels cost $600 to $1,500 installed (4Feldco, 7 Oct 2026). Three or more cost $900 to $2,000 or more. At 3 panels, price a full door instead: a new single door costs $700 to $1,200 for standard steel, a double $1,000 to $2,500. Price the full job with the garage door cost calculator and the garage door replacement cost calculator before you approve 3 panels.
Count the damaged sections, not the dents. Two dents on one panel is still one panel.
Dent repair vs panel replacement
Not every dent needs a new panel — the dent decides it.
A shallow dent under 2 inches across, with smooth edges and no cracked paint, can often be fixed at home with heat and cold, or a wood block and a rubber mallet, for $30 to $75 in materials (4Feldco, 7 Oct 2026).
A minor dent fixed by a pro costs $100 to $300 — see the Quality Overhead Door dent repair guide, Oct 2026. A moderate dent with cracked paint costs $250 to $400. A severe dent — a deep crease, a crack, a crumpled section, or a dent that stops the door moving right — needs a new panel at $300 to $900 or more per panel.
| Damage | Best fix | Typical cost in 2026 |
|---|---|---|
| Shallow dent, under 2 inches, paint intact | DIY or pro dent repair | $30–$75 DIY, $100–$300 pro |
| Moderate dent, paint cracked | Pro dent repair | $250–$400 |
| Deep crease, crack, crumpled section | Replace the panel | $300–$900+ per panel |
| Dent near a hinge, edge or bottom bracket | Replace the panel | $300–$900+ per panel |
| Two or more panels damaged | Replace panels, or the door | $600–$1,500, or $700–$3,500 for a door |
Sources: Quality Overhead Door, Oct 2026; 4Feldco, 7 Oct 2026. A dent near a hinge or a panel edge is structural, not cosmetic — filler will not hold it.
Watch: Garage Door Help : How to Replace a Single Garage Door Panel — Specialized Garage Doors, expert Jacob Swenson. The title and expert were confirmed on the YouTube watch page on 12 Nov 2026; the upload date could not be verified from the watch page, so no date is given here — re-check it before publishing.
Matching the panel: profile, colour and discontinued doors
A replacement panel is not universal. It is ordered by brand, model, size, profile and colour — get one wrong and it will not fit, or will not match.
Profile. The profile is the shape of the panel face — short, long, raised, flush, carriage house. The new panel must match it, or the joints will not close. Photograph the damaged panel and the label on the top or bottom section — it carries the brand, model, size and colour code.
Colour. A new panel in the same colour code can still look different, because sun fades the old panels and paint codes change. The match is usually close on a door under 5 years old. On a door over 10 years old, expect a visible difference. Repainting the new panel costs $75 to $200. Painting the whole door costs $300 to $800.
Discontinued doors. Makers change profiles and colours every few years. Panels are easy to find under 5 years old, harder after 7 to 10 years, and often gone after 20 years. Sourcing one adds $100 to $300 and takes 2 to 4 weeks, with no guarantee. If none can be found, a new door is the only option — Angi notes that hard-to-match panels may mean replacing the entire door (Angi, 13 Oct 2026).
A pro can usually fit a panel that is still made in 1 to 3 hours. An ordered panel takes 3 to 7 working days, or 2 to 4 weeks for a discontinued or custom colour.
When one panel is enough, and when the door should go
One panel is enough when 4 things are true: the damage is in 1 or 2 sections, the rest of the door is sound and the frame is straight, the panel is still made in the same profile and colour, and the door is under 15 years old.
A new door is the smarter spend when any of these is true: 3 or more panels damaged, the panel discontinued with no match, the bottom section rusting through or the frame bent, the door over 20 years old with 2 or 3 faults, or the panel job costing more than 40% to 50% of a new door.
Two rules point the same way. The panel rule: if the sections cost more than about 40% of a new door, buy the door. The wider repair rule: over 50%, replace it. A $550 panel on a $1,200 door is 46% — the borderline. Get the door price first, then decide.
A panel swap moves hinges and rollers, and the door has to be rebalanced after it. If a spring is near the end of its life, do it in the same visit — it is cheaper than a second call-out. Check the spring size with the garage door spring calculator — an 8×7 steel door needs a 207x2x22 spring — and the cable length with the garage door cable length calculator. If the opener struggles with the heavier panel, price one with the garage door opener cost calculator.
Watch: Garage Door Replacement in Orange County — OC Garage Door Guys LLC, 23 Nov 2025. Title, channel and date were verified in the Repair Cost v5 work on 12 Nov 2026; a watch-page re-check the same day returned no title text, so re-verify it before publishing.
Insurance, warranty and what the calculator asks for
Insurance. Sudden, accidental damage is usually covered — storm, hail, a car backing into the door, vandalism. Wear and tear is not. The claim is paid against your deductible, so compare the repair price with the deductible before you file. A $550 panel with a $500 deductible is barely a claim. Photograph the damage from 3 angles before anything is moved, and keep the written estimate. If the panel cannot be matched, ask the adjuster whether they will cover a full door instead.
Warranty. A new door usually carries 1 to 5 years on the panels, a panel swap at least 1 year on labour. Ask for both in writing, and ask whether a DIY fit voids the panel warranty.
What the calculator asks for. Zip code, panel count (1 to 10), and door type — Standard Steel, Insulated Steel, Wooden, or Custom Design. Then 6 extras: springs, opener, insulation, paint, windows, and emergency. Tick only the ones that apply — a windowed panel costs more than a plain one, and an emergency visit adds $100 to $300. Price the whole repair first with the garage door repair cost calculator if more than the panel is broken.
5 questions to ask before you book
- Is the exact panel still made in my profile and colour, or will it be a close match? Get the brand, model and colour code in writing.
- What is the total price, in writing, before you start? Panel, labour and fee, as 3 lines.
- Does the price include the hinge and roller transfer, the rebalance, and the old panel removal?
- What is the warranty on the panel and on the labour? At least 1 year on labour.
- How long is the lead time? A standard panel takes 3 to 7 working days. A discontinued or custom panel takes 2 to 4 weeks.
For a second opinion, use the Garage Door Hub calculator hub. To reach a pro, use the contact page.
Garage Door Hub connects homeowners with trusted local garage door pros. Need a repair? Need a replacement? Start here. First, find out what it should cost. Then, price your exact job with our free calculator. Next, find a pro near you. Fast. No jargon. No guesswork. No surprise bills. Just clear prices, honest guides, and a local pro you can call today.
Frequently asked questions
How much does it cost to replace a garage door panel in 2026? One panel costs $350 to $900 installed in 2026, and most homeowners pay about $550 (Angi, 13 Oct 2026). A wood or custom panel costs $600 to $1,500 or more.
Can you replace just one panel on a garage door? Yes, on a sectional door, when the damage is in 1 or 2 sections, the frame is straight, and the panel is still made in the same profile and colour. A tilt-up or one-piece door usually needs a full replacement instead.
Is it cheaper to repair a dent or replace the panel? A minor dent costs $100 to $300 to repair, which is cheaper than a $350 to $900 panel. A deep crease, crack or crumpled section cannot be repaired, so the panel has to be replaced.
Will a new panel match my old garage door? Usually yes on a door under 5 years old, if the maker still produces the profile and colour. On a door over 10 years old, sun fading and discontinued colours can leave a visible difference, and repainting costs $75 to $200.
Should I replace a panel or the whole garage door? Replace the panel when 1 or 2 sections are damaged and the door is under 15 years old. Replace the door when 3 or more panels are damaged, the panel is discontinued, or the panel job costs more than 40% to 50% of a new door.