Short answer: A new garage door costs $754 to $1,707 installed, with most homeowners paying about $1,231 on average (Angi, 21 September 2026). An insulated steel single door, 9×7, costs about $1,400, and a double, 16×7, about $2,150 (GarageCalculator, October 2026). Size and material move the price most. Labour, removal, and a permit can add more on top.

Garage Door Hub connects you with a trusted local pro. Get a clear price for your garage door repair or replacement first.

A new garage door is one of the biggest single buys for a home, and the price range is wide enough to confuse anyone. This guide is part of our new garage door guide, and it answers the money question first: what a new door costs by size and by material, installed, in 2026. Every price below names its source and year, and sources that disagree are kept apart, so you can see why two quotes can look so different.

New Garage Door Cost at a Glance (2026)

The headline figure for a new garage door cost is $754 to $1,707 installed, with an average of $1,231 (Angi, updated 21 September 2026, from 15,434 verified projects). That range covers most standard single and double doors, fitted, across the United States. It does not cover every case: a plain steel single door can sit near the low end, while a large wood or full-view glass door can pass the high end by a wide margin.

What you are paying for Typical cost, installed Source
New garage door, installed $754-$1,707, average $1,231 Angi, 21 Sep 2026
Insulated steel single, 9×7, installed About $1,400 GarageCalculator, Oct 2026
Insulated steel double, 16×7, installed About $2,150 GarageCalculator, Oct 2026
Labour, priced on its own $200-$500, average $350 Angi, 21 Sep 2026
Old door removal and disposal $50-$200 Angi, 21 Sep 2026
Permit, where one is needed $40-$120 Angi, 21 Sep 2026

Cost by size

Size is the first thing that sets the price, because a double door uses about twice the material of a single and takes longer to fit. An insulated steel single, 9×7, costs about $1,400 installed, and the same door in a double, 16×7, costs about $2,150 installed (GarageCalculator, October 2026). That gap of about $750 is the size step for one material and one build, so it is a cleaner comparison than the wide national range.

  • Single 9×7, insulated steel, installed: about $1,400 (GarageCalculator, October 2026).
  • Double 16×7, insulated steel, installed: about $2,150 (GarageCalculator, October 2026).
  • National average, all sizes and materials: $754-$1,707, average $1,231 (Angi, 21 September 2026).

What the average covers

Angi’s average of $1,231 is the installed cost of a typical replacement door, from 15,434 verified projects (Angi, 21 September 2026). It is not a door-only price, and it is not a quote for your home. Use it as a check on a quote, then price your exact size and material with our Garage Door Replacement Cost Calculator before you call a pro.

  • The average covers a fitted door on a standard opening, not a custom size or a premium material.
  • Labour, removal, a new opener, and a permit may sit inside the range or on top of it, so ask what is included.
  • HomeGuide’s figures are older, updated 10 July 2025, so treat them as a second view, not as current as Angi.

1. New Garage Door Cost by Size — Single, Double and Oversized

New garage door cost by size is the simplest way to narrow the range, because the opening decides how much door you buy. A single garage takes one car, a double takes two, and an oversized opening takes a taller or wider door than the standard sizes. The table below keeps each source apart, with its own date, so a 2025 figure is never mixed into a 2026 average.

new garage door cost — single-car and double-car garage doors side by side showing the size difference

Size Typical cost, installed Source
Single, 9×7, insulated steel About $1,400 GarageCalculator, Oct 2026
Double, 16×7, insulated steel About $2,150 GarageCalculator, Oct 2026
Single, all materials $700-$2,700 HomeGuide, 10 Jul 2025
Double, all materials $1,000-$3,500 HomeGuide, 10 Jul 2025
All sizes, installed $700-$3,500 HomeGuide, 10 Jul 2025

Single doors: 8×7 and 9×7

A single door is the most common size in the United States, and 9×7 is the most common single size, with 8×7 also widely used. The verified installed figure for a single is for an insulated steel 9×7, at about $1,400 (GarageCalculator, October 2026). HomeGuide puts all single doors, all materials, at $700 to $2,700 installed (HomeGuide, 10 July 2025).

  • 9×7 is the most common single size; 8×7 is also standard.
  • Insulated steel 9×7, installed: about $1,400 (GarageCalculator, October 2026).
  • All singles, all materials, installed: $700-$2,700 (HomeGuide, 10 July 2025).
  • No verified installed price for an 8×7 on its own was found in the sources used for this guide, so no figure is given here.

Double doors: 16×7 and 16×8

A double door covers a two-car garage in one opening, and 16×7 is the most common double size. An insulated steel double, 16×7, costs about $2,150 installed (GarageCalculator, October 2026). HomeGuide puts all double doors, all materials, at $1,000 to $3,500 installed (HomeGuide, 10 July 2025), which is a wider range because it covers cheap steel at one end and wood and glass at the other.

  • 16×7 is the most common double size; 16×8 is the taller standard size.
  • Insulated steel 16×7, installed: about $2,150 (GarageCalculator, October 2026).
  • All doubles, all materials, installed: $1,000-$3,500 (HomeGuide, 10 July 2025).
  • No verified installed price for a 16×8 on its own was found in the sources used for this guide, so no figure is given here.

Oversized doors

An oversized door is one that is wider or taller than the standard sizes, for example for a tall vehicle or a wide opening. It costs more than a standard double because the door, tracks, and springs are all larger, and it may need a stronger opener. No verified installed price for an oversized door was found in the sources used for this guide, so no figure is given here, and any quote for one should be priced on its exact size.

  • Oversized means wider or taller than standard, not just a double.
  • Larger door, tracks, and springs all push the price up.
  • A stronger opener may be needed, which adds to the job.
  • Get the price on the exact width and height, not on a standard size.

2. New Garage Door Cost by Material

Garage door cost by material is where the range opens up most, because the cheapest steel door and the dearest glass door are thousands of dollars apart. Angi and HomeGuide both publish material ranges, and they do not agree on every material, so this section keeps the two tables separate and flags the gaps. The full material comparison, with lifespan, weight, and care, is in our guide to steel vs wood vs aluminium vs glass fibreglass garage door materials.

Material Typical cost, installed Source
Steel $650-$3,200 Angi, 21 Sep 2026
Aluminium $600-$2,900 Angi, 21 Sep 2026
Vinyl $800-$2,500 Angi, 21 Sep 2026
Fibreglass $800-$2,700 Angi, 21 Sep 2026
Wood $900-$4,500 Angi, 21 Sep 2026
Composite / faux wood $650-$4,800 Angi, 21 Sep 2026
Glass $2,500-$8,000 Angi, 21 Sep 2026

Angi material prices

Angi, updated 21 September 2026, puts steel at $650 to $3,200 installed and aluminium at $600 to $2,900 installed, which makes those two the cheapest ways into a new door. Wood runs $900 to $4,500, composite and faux wood $650 to $4,800, and glass $2,500 to $8,000, the dearest by a clear margin. Vinyl sits at $800 to $2,500 and fibreglass at $800 to $2,700 on the same table.

  • Cheapest entry: aluminium $600-$2,900 and steel $650-$3,200 (Angi, 21 September 2026).
  • Mid-range: vinyl $800-$2,500 and fibreglass $800-$2,700 (Angi, 21 September 2026).
  • Dearest: wood $900-$4,500, composite $650-$4,800, and glass $2,500-$8,000 (Angi, 21 September 2026).
  • Each range covers plain to premium builds, so the top end is a high-spec door, not a plain one.
Material Typical cost, installed Source
Steel $700-$2,500 HomeGuide, 10 Jul 2025
Aluminium $800-$2,500 HomeGuide, 10 Jul 2025
Fibreglass $1,000-$2,100 HomeGuide, 10 Jul 2025
Wood $1,200-$4,000 HomeGuide, 10 Jul 2025
Composite $1,200-$2,800 HomeGuide, 10 Jul 2025
Glass $2,500-$6,000 HomeGuide, 10 Jul 2025

HomeGuide material prices

HomeGuide, updated 10 July 2025, puts steel at $700 to $2,500 installed and aluminium at $800 to $2,500 installed, with wood at $1,200 to $4,000 and glass at $2,500 to $6,000. It gives no vinyl figure. These figures are a year older than Angi’s, so use them as a second view on the same materials, not as a 2026 price.

  • Steel $700-$2,500 and aluminium $800-$2,500 (HomeGuide, 10 July 2025).
  • Wood $1,200-$4,000 and glass $2,500-$6,000 (HomeGuide, 10 July 2025).
  • Fibreglass $1,000-$2,100 and composite $1,200-$2,800 (HomeGuide, 10 July 2025).
  • No vinyl figure is given by HomeGuide in the sources used for this guide.

Where the two sources disagree

The two sources disagree most on fibreglass and composite, and the gap is wide enough to change a budget. Angi puts fibreglass at $800 to $2,700, while HomeGuide puts it at $1,000 to $2,100, so Angi starts lower and ends higher. Angi puts composite at $650 to $4,800, while HomeGuide puts it at $1,200 to $2,800, so Angi’s top end is $2,000 above HomeGuide’s. Do not average the two tables into one figure.

  • Fibreglass: Angi $800-$2,700 (21 September 2026) vs HomeGuide $1,000-$2,100 (10 July 2025).
  • Composite: Angi $650-$4,800 (21 September 2026) vs HomeGuide $1,200-$2,800 (10 July 2025).
  • Glass: Angi tops out at $8,000, HomeGuide at $6,000, a $2,000 gap at the top end.
  • Steel and wood agree more closely at the low end, and drift apart at the high end.

3. Door-Only vs Installed — What Is Included

Door-only vs installed is the mix-up that causes most price shocks, because the same door can be quoted two ways. A door-only price is the door and its hardware, with no fitting. An installed price adds the fitting work, and it should say so in plain words. Always check which one a quote is before you compare it with another.

new garage door cost — newly installed garage door with a toolbox on the driveway

What installed usually includes

An installed price usually covers the door itself, the tracks, the springs, and the labour to fit and balance the door. The Angi national range of $754 to $1,707, average $1,231 (Angi, 21 September 2026), is an installed figure on that basis. Labour priced on its own runs $200 to $500, average $350 (Angi, 21 September 2026), which is the fitting part of the installed total.

  • The door, tracks, and springs.
  • The labour to fit the door and set the balance.
  • A check that the door opens, closes, and seals as it should.
  • Ask for the door model in writing, so you know what was fitted.

What is often charged on top

Some costs often sit outside the installed door price, and they are the ones that push a quote up on the day. Removal and disposal of the old door runs $50 to $200 (Angi, 21 September 2026), a permit runs $40 to $120 where one is needed (Angi, 21 September 2026), and a new opener is a separate add-on. The full breakdown of the fitting job is in our guide to garage door installation cost.

  • Old door removal and disposal: $50-$200 (Angi, 21 September 2026).
  • Permit, where one is needed: $40-$120 (Angi, 21 September 2026).
  • A new opener, if the old one is not kept.
  • Extra work on the frame or opening, if the old opening is out of line or damaged.

4. What Changes the Price of a New Garage Door

What changes the price of a new garage door comes down to a short list: size, material, insulation, windows, the opener, removal, the permit, and where you live. Size and material set the base price, and the rest adds to it in steps. Knowing the list lets you see which part of a quote you can change and which part you cannot.

Size and material

Size and material are the two biggest price levers, and they work together. A double costs more than a single in the same material, and glass costs more than steel in the same size. The size step for insulated steel is about $750, from about $1,400 for a 9×7 single to about $2,150 for a 16×7 double (GarageCalculator, October 2026). The material step is wider still, from steel at $650 to $3,200 to glass at $2,500 to $8,000 (Angi, 21 September 2026).

  • Double vs single, insulated steel: about $2,150 vs about $1,400 (GarageCalculator, October 2026).
  • Steel vs glass, all sizes: $650-$3,200 vs $2,500-$8,000 (Angi, 21 September 2026).
  • Wood and composite sit between steel and glass, with wide ranges of their own.
  • A custom size costs more than a standard size in the same material.

Insulation and windows

Insulation adds a clear premium, and it is worth pricing on its own. An insulated door costs $1,100 to $4,200 installed (Angi, 21 September 2026). The premium over a non-insulated door is $200 to $800 more (Titanium Garage Door, 31 May 2026), while a second source puts it at $300 to $800 (Above Board Pros, 2026). Keep the two premium figures apart, as they come from different sources and different dates.

  • Insulated door, installed: $1,100-$4,200 (Angi, 21 September 2026).
  • Insulation premium: $200-$800 (Titanium Garage Door, 31 May 2026) vs $300-$800 (Above Board Pros, 2026).
  • Windows add cost too, but no verified window price was found in the sources used for this guide, so no figure is given here.
  • Insulation matters most on an attached garage or a garage with a room above it.

Opener, removal and permit

The opener, removal, and permit are the three add-ons that most often surprise a buyer, because they are easy to leave out of a door price. A new opener add-on runs $200 to $1,300 installed (Angi, 21 September 2026), removal and disposal runs $50 to $200 (Angi, 21 September 2026), and a permit runs $40 to $120 where one is needed (Angi, 21 September 2026). Together they can add $290 to $1,620 to a job, so ask whether each one is in the quote.

  • New opener add-on: $200-$1,300 (Angi, 21 September 2026).
  • Removal and disposal: $50-$200 (Angi, 21 September 2026).
  • Permit, where needed: $40-$120 (Angi, 21 September 2026).
  • Most like-for-like swaps need no permit, so that line is often $0.

5. How to Price Your Exact Job Before You Call a Pro

How to price your exact job before you call a pro is a short job, and it pays off in every quote you get after it. Measure the opening, pick a size and a material, decide on insulation and windows, then run the numbers through a calculator. That gives you a figure to check each quote against, instead of taking the first number you hear.

new garage door cost — tape measure across a garage door opening while measuring for a new door

Steps to price your job

Work through these steps in order, and write each answer down before you move on. Each step narrows the price range, so by the last step you have a figure for your door, not a national average.

  1. Measure the width and height of the opening, and note whether it is a single or a double.
  2. Pick a material, using the Angi and HomeGuide tables above, and note the range for that material.
  3. Decide on insulation and windows, and add the insulation premium from the section above.
  4. Price your exact size and material with our Garage Door Cost Calculator.
  5. Get two or three written quotes that name the door model, the material, and what is included.

What to ask in a written quote

A written quote should name every part of the job, so there is nothing left to argue about on the day. Ask for each line below in writing before you agree to anything, and compare quotes line by line, not by the total alone.

  • The door model, size, material, and insulation level.
  • Labour, and whether it is inside the door price or on top of it.
  • Removal and disposal of the old door, with its price.
  • The opener, if one is included, with its model.
  • The permit, if one is needed, and who pays for it.

Video: New Garage Door Cost 2026 | Prices by Size and Material (Installed) (Coming Soon)

A 60 to 120 second video for this guide is coming soon. It will cover the new garage door cost by size and material, the size and material tables, and how to price your exact job. No video is embedded here yet.

Garage Door Hub connects homeowners with trusted local garage door pros. Need a repair? Need a replacement? Start here. First, find out what it should cost. Then, price your exact job with our free calculator. Next, find a pro near you. Fast. No jargon. No guesswork. No surprise bills. Just clear prices, honest guides, and a local pro you can call today.

New Garage Door Cost — Frequently Asked Questions

How much does a new garage door cost in 2026?

A new garage door costs $754 to $1,707 installed, averaging about $1,231 (Angi, 21 September 2026). An insulated steel single, 9×7, costs about $1,400, and a double, 16×7, about $2,150 (GarageCalculator, October 2026).

How much does a 16×7 garage door cost installed?

An insulated steel double, 16×7, costs about $2,150 installed (GarageCalculator, October 2026). HomeGuide puts all double doors, all materials, at $1,000 to $3,500 installed (HomeGuide, 10 July 2025).

What is the cheapest garage door material?

Aluminium is the cheapest on Angi, at $600 to $2,900 installed, just below steel at $650 to $3,200 (Angi, 21 September 2026). Glass is the dearest, at $2,500 to $8,000 on the same table.

How much is a double garage door vs two single doors?

A double door costs $1,000 to $3,500 installed, all materials, and a single costs $700 to $2,700 (HomeGuide, 10 July 2025). No verified price for two singles fitted together was found in the sources used for this guide, so price both options on your exact opening before you choose.

Does the price include installation?

The prices in this guide are installed prices unless the text says otherwise. A door-only price covers the door and its hardware only, with no fitting, so check which one a quote is before you compare it.

How much extra are labour, removal and a permit?

Labour priced on its own is $200 to $500, averaging $350, removal and disposal is $50 to $200, and a permit is $40 to $120 where one is needed (Angi, 21 September 2026). Most like-for-like swaps need no permit.